Anker SOLIX
Anker SOLIX C1000
Anker SOLIX C1000 stores 1,056 Wh and can hold a continuous 1,800 W load, with a published motor surge of 2,400 W.
Check priceOpens the manufacturer page. No affiliate link is set in links.json.
Specifications
| Capacity | 1,056 Wh |
|---|---|
| Usable in Willrun math | 898 Wh (× 0.85) |
| Continuous AC output | 1,800 W |
| Motor surge used | 2,400 W |
| Resistive boost | None applied |
| Chemistry | LiFePO4 |
| Cycle life | 3,000 cycles to 80% |
| Weight | 28.44 lb |
| Dimensions | 14.8 × 8.07 × 10.5 |
| Outlets | 6 AC outlets, 1,800 W continuous. USB-C at 100 W and 30 W, 2 USB-A at 12 W, and a 12 V/10 A car port. |
| Launch price | Not verified. Current shelf prices were not copied in. |
| Source | https://www.ankersolix.com/products/c1000 Tech specs: 1,056 Wh, LiFePO4, 3,000 cycles to 80%, 1,800 W pure sine wave, 2,400 W AC surge, 6 AC outlets, 28.44 lb. The FAQ says SurgePad is for heat-generating devices when output exceeds the rated output; the 2,400 W figure is the published AC surge. |
Answer pages
- Runs: ResMed AirSense 11, typical power from the user guide
- Runs, surge risk: BLACK+DECKER BD12NWES 12,000 Btu/h window air conditioner
Every appliance in the set
Questions
How long will the Anker SOLIX C1000 run a CPAP?
Runs. At the AirSense 11 user-guide typical of 56.1 W, usable energy is 898 Wh and runtime is about 16.0 hr.
What does the 0.85 factor do?
Willrun multiplies nameplate watt-hours by 0.85 before dividing by average draw. That allowance is for inverter loss. It is not a measured efficiency for this model.
Is the surge rating safe to use for a fridge or a pump?
This model publishes a surge of 2,400 W separately from any heater-only boost, so Willrun uses it when the appliance also publishes startup watts. If the appliance does not, the verdict stays a surge risk.
Where do the station numbers come from?
Tech specs: 1,056 Wh, LiFePO4, 3,000 cycles to 80%, 1,800 W pure sine wave, 2,400 W AC surge, 6 AC outlets, 28.44 lb. The FAQ says SurgePad is for heat-generating devices when output exceeds the rated output; the 2,400 W figure is the published AC surge.