Heat
Lasko 755320 ceramic heater, high
Lasko 755320 ceramic heater, high draws 1,500 W while on, and about 1,500 W after its published duty cycle.
Published draw
| Running watts | 1500 |
|---|---|
| Startup or peak watts | 1500 |
| Average watts used for runtime | 1500 |
| Duty cycle | 1 |
| Load type | resistive · eligible for resistive boost modes |
| Source | https://lasko.com/products/lasko-1500w-digital-ceramic-space-heater-with-remote-755320-silver Lasko lists 120 V, current 7.5 A to 12.5 A, and energy output 900 W to 1,500 W. High is 1,500 W. A resistive element does not have a separate motor surge, so surge is set equal to the high setting. The thermostat cycles in real rooms; this entry assumes the high element is on. |
Stations
| Station | Verdict | Runtime |
|---|---|---|
| EcoFlow RIVER 2 | Won't run | — |
| EcoFlow RIVER 2 Max | Won't run | — |
| EcoFlow RIVER 2 Pro | Runs | 26 min |
| EcoFlow RIVER 3 Plus | Won't run | — |
| EcoFlow DELTA 2 | Runs | 35 min |
| EcoFlow DELTA 2 Max | Runs | 1.2 hr |
| EcoFlow DELTA 3 | Runs | 35 min |
| EcoFlow DELTA 3 Plus | Runs | 35 min |
| EcoFlow DELTA Pro 3 | Runs | 2.3 hr |
| BLUETTI AC70 | Runs | 26 min |
| BLUETTI AC180 | Runs | 39 min |
| BLUETTI AC200L | Runs | 1.2 hr |
| Jackery Explorer 1000 v2 | Runs | 36 min |
| Jackery Explorer 1000 Plus | Runs | 43 min |
| Jackery Explorer 2000 Plus | Runs | 1.2 hr |
| Jackery Explorer 2000 v2 | Runs | 1.2 hr |
| Anker SOLIX C300 | Won't run | — |
| Anker SOLIX C800 | Runs | 26 min |
| Anker SOLIX C1000 | Runs | 36 min |
| Anker SOLIX F2000 (PowerHouse 767) | Runs | 1.2 hr |
| Anker SOLIX F3800 | Runs | 2.2 hr |
| Goal Zero Yeti 500X | Won't run | — |
| Goal Zero Yeti 1000X | Runs | 34 min |
| Goal Zero Yeti 1500X | Runs | 52 min |
Questions
What number does Willrun compare to the inverter?
Running watts of 1,500 W must fit under continuous output, or under a resistive boost when this load is a simple heater. Published peak is 1,500 W.
How is runtime calculated?
Usable watt-hours (capacity × 0.85) divided by 1,500 W. The duty cycle is 1, derived from the source note, not assumed.
Where did this come from?
Lasko lists 120 V, current 7.5 A to 12.5 A, and energy output 900 W to 1,500 W. High is 1,500 W. A resistive element does not have a separate motor surge, so surge is set equal to the high setting. The thermostat cycles in real rooms; this entry assumes the high element is on.