Jackery
Jackery Explorer 1000 v2
Jackery Explorer 1000 v2 stores 1,070 Wh and can hold a continuous 1,500 W load, with a published motor surge of 3,000 W.
Check priceOpens the manufacturer page. No affiliate link is set in links.json.
Specifications
| Capacity | 1,070 Wh |
|---|---|
| Usable in Willrun math | 910 Wh (× 0.85) |
| Continuous AC output | 1,500 W |
| Motor surge used | 3,000 W |
| Resistive boost | None applied |
| Chemistry | LiFePO4 |
| Cycle life | 4,000 cycles to 70%+ |
| Weight | 23.8 lb |
| Dimensions | 12.87 × 8.82 × 9.72 |
| Outlets | 3 AC outlets, 1,500 W rated. USB-C at 100 W and 30 W, USB-A at 18 W, and a 12 V/10 A car port. |
| Launch price | Not verified. Current shelf prices were not copied in. |
| Source | https://www.jackery.com/products/jackery-explorer-1000-v2 Spec block: 30.4 Ah / 35.2 V DC (1,070 Wh), LiFePO4, 4,000 cycles to 70%+, about 23.8 lb, AC total 1,500 W rated and 3,000 W surge peak. |
Answer pages
- Runs: ResMed AirSense 11, typical power from the user guide
- Runs, surge risk: Zoeller Model 53 3/10 HP sump pump, 115 V
Every appliance in the set
Questions
How long will the Jackery Explorer 1000 v2 run a CPAP?
Runs. At the AirSense 11 user-guide typical of 56.1 W, usable energy is 910 Wh and runtime is about 16.2 hr.
What does the 0.85 factor do?
Willrun multiplies nameplate watt-hours by 0.85 before dividing by average draw. That allowance is for inverter loss. It is not a measured efficiency for this model.
Is the surge rating safe to use for a fridge or a pump?
This model publishes a surge of 3,000 W separately from any heater-only boost, so Willrun uses it when the appliance also publishes startup watts. If the appliance does not, the verdict stays a surge risk.
Where do the station numbers come from?
Spec block: 30.4 Ah / 35.2 V DC (1,070 Wh), LiFePO4, 4,000 cycles to 70%+, about 23.8 lb, AC total 1,500 W rated and 3,000 W surge peak.