Fans
Hunter 52774 44-inch ceiling fan, high speed
Hunter 52774 44-inch ceiling fan, high speed draws 12.5 W while on, and about 12.5 W after its published duty cycle.
Published draw
| Running watts | 12.5 |
|---|---|
| Startup or peak watts | Not published |
| Average watts used for runtime | 12.5 |
| Duty cycle | 1 |
| Load type | fan |
| Source | https://data.energystar.gov/d/2te3-nmxp ENERGY STAR lists high speed at 12.5 W, low speed at 1.6 W, and standby at 0.3 W for this 44-inch fan. The run check uses high speed. Startup watts are not published. |
Stations
| Station | Verdict | Runtime |
|---|---|---|
| EcoFlow RIVER 2 | Runs | 17.4 hr |
| EcoFlow RIVER 2 Max | Runs | 34.8 hr |
| EcoFlow RIVER 2 Pro | Runs | 2.2 days |
| EcoFlow RIVER 3 Plus | Runs | 19.4 hr |
| EcoFlow DELTA 2 | Runs | 2.9 days |
| EcoFlow DELTA 2 Max | Runs | 5.8 days |
| EcoFlow DELTA 3 | Runs | 2.9 days |
| EcoFlow DELTA 3 Plus | Runs | 2.9 days |
| EcoFlow DELTA Pro 3 | Runs | 11.6 days |
| BLUETTI AC70 | Runs | 2.2 days |
| BLUETTI AC180 | Runs | 3.3 days |
| BLUETTI AC200L | Runs | 5.8 days |
| Jackery Explorer 1000 v2 | Runs | 3.0 days |
| Jackery Explorer 1000 Plus | Runs | 3.6 days |
| Jackery Explorer 2000 Plus | Runs | 5.8 days |
| Jackery Explorer 2000 v2 | Runs | 5.8 days |
| Anker SOLIX C300 | Runs | 19.6 hr |
| Anker SOLIX C800 | Runs | 2.2 days |
| Anker SOLIX C1000 | Runs | 3.0 days |
| Anker SOLIX F2000 (PowerHouse 767) | Runs | 5.8 days |
| Anker SOLIX F3800 | Runs | 10.9 days |
| Goal Zero Yeti 500X | Runs | 33.8 hr |
| Goal Zero Yeti 1000X | Runs | 2.8 days |
| Goal Zero Yeti 1500X | Runs | 4.3 days |
Questions
What number does Willrun compare to the inverter?
Running watts of 12.5 W must fit under continuous output, or under a resistive boost when this load is a simple heater. Startup watts were not published.
How is runtime calculated?
Usable watt-hours (capacity × 0.85) divided by 12.5 W. The duty cycle is 1, derived from the source note, not assumed.
Where did this come from?
ENERGY STAR lists high speed at 12.5 W, low speed at 1.6 W, and standby at 0.3 W for this 44-inch fan. The run check uses high speed. Startup watts are not published.