Anker SOLIX
Anker SOLIX F2000 (PowerHouse 767)
Anker SOLIX F2000 (PowerHouse 767) stores 2,048 Wh and can hold a continuous 2,400 W load.
Check priceOpens the manufacturer page. No affiliate link is set in links.json.
Specifications
| Capacity | 2,048 Wh |
|---|---|
| Usable in Willrun math | 1,741 Wh (× 0.85) |
| Continuous AC output | 2,400 W |
| Motor surge used | Not used |
| Resistive boost | None applied |
| Chemistry | LiFePO4 |
| Cycle life | 3,000 cycles to null |
| Weight | Not published on the source page |
| Dimensions | Not published on the source page |
| Outlets | 4 AC outlets, 1 TT-30R, 3 USB-C at 100 W, 2 USB-A, and 2 car sockets. 12 ports total. AC inverter mode is 120 V, 20 A, 2,400 W. |
| Launch price | Not verified. Current shelf prices were not copied in. |
| Source | https://www.ankersolix.com/f2000 Spec block for model A1780: 2,048 Wh, LFP, 3,000 cycles, AC output 2,400 W max. A separate surge rating and the weight were not in that spec block, so neither is used. A marketing line about 3,600 W was not in the spec table and is omitted. |
Answer pages
Every appliance in the set
Questions
How long will the Anker SOLIX F2000 (PowerHouse 767) run a CPAP?
Runs. At the AirSense 11 user-guide typical of 56.1 W, usable energy is 1,741 Wh and runtime is about 31.0 hr.
What does the 0.85 factor do?
Willrun multiplies nameplate watt-hours by 0.85 before dividing by average draw. That allowance is for inverter loss. It is not a measured efficiency for this model.
Is the surge rating safe to use for a fridge or a pump?
The extra headroom on this model is not published as a motor surge. Willrun does not treat it as locked-rotor starting capacity.
Where do the station numbers come from?
Spec block for model A1780: 2,048 Wh, LFP, 3,000 cycles, AC output 2,400 W max. A separate surge rating and the weight were not in that spec block, so neither is used. A marketing line about 3,600 W was not in the spec table and is omitted.