Answer
Can the Anker SOLIX F2000 (PowerHouse 767) run Panasonic NN-SU656WAWH microwave, electrical input?
Runs
Runs. Draw is 1,500 W, within the 2,400 W continuous output. No separate surge was published for this electronic load. Estimated runtime: about 1.2 hr.
Check priceOpens the manufacturer page. No affiliate link is set in links.json.
The comparison
| Anker SOLIX F2000 (PowerHouse 767) | Panasonic NN-SU656WAWH microwave, electrical input | |
|---|---|---|
| Continuous output / running draw | 2,400 W | 1,500 W |
| Surge or peak | Not applied to motors | Not published |
| Resistive boost | — | Not eligible |
| Capacity / average draw | 2,048 Wh nameplate, 1,741 Wh usable | 1,500 W |
| Runtime | 1.2 hr | |
| Sources | Station source | Appliance source |
Questions
Can the Anker SOLIX F2000 (PowerHouse 767) run Panasonic NN-SU656WAWH microwave, electrical input?
Runs. Draw is 1,500 W, within the 2,400 W continuous output. No separate surge was published for this electronic load. Estimated runtime: about 1.2 hr.
What watts were compared?
Station continuous output is 2,400 W. No motor-surge rating is applied. Appliance running draw is 1,500 W.
How was the runtime calculated?
2,048 Wh × 0.85 = 1,741 Wh usable, divided by 1,500 W average draw.
Where did the numbers come from?
Spec block for model A1780: 2,048 Wh, LFP, 3,000 cycles, AC output 2,400 W max. A separate surge rating and the weight were not in that spec block, so neither is used. A marketing line about 3,600 W was not in the spec table and is omitted. Panasonic lists power supply 120 V / 60 Hz, microwave output 1,100 W, and microwave power consumption 1,500 W. The station has to supply the 1,500 W input, not the 1,100 W cooking output. A separate startup surge is not published. X-Boost and Power Lifting are not applied, because those modes are described for simple heating loads and a microwave is an electronic supply.
More on the Anker SOLIX F2000 (PowerHouse 767) · More on this appliance