Refrigeration
Danby DAR032B1SLM 3.2 cu ft compact refrigerator
Danby DAR032B1SLM 3.2 cu ft compact refrigerator draws 150 W while on, and about 29.6 W after its published duty cycle.
Published draw
| Running watts | 150 |
|---|---|
| Startup or peak watts | Not published |
| Average watts used for runtime | 29.6 |
| Duty cycle | 0.197 |
| Load type | compressor |
| Source | https://www.danby.com/products/compact-refrigerators/dar032b1slm/ Danby lists 115 V, 150 W, and 259 kWh/year. Average draw is 29.6 W. Duty cycle 0.197 is the annual average implied by those two figures. Startup watts are not published. |
Stations
| Station | Verdict | Runtime |
|---|---|---|
| EcoFlow RIVER 2 | Runs, surge risk | 7.4 hr |
| EcoFlow RIVER 2 Max | Runs, surge risk | 14.7 hr |
| EcoFlow RIVER 2 Pro | Runs, surge risk | 22.1 hr |
| EcoFlow RIVER 3 Plus | Runs, surge risk | 8.2 hr |
| EcoFlow DELTA 2 | Runs, surge risk | 29.4 hr |
| EcoFlow DELTA 2 Max | Runs, surge risk | 2.5 days |
| EcoFlow DELTA 3 | Runs, surge risk | 29.4 hr |
| EcoFlow DELTA 3 Plus | Runs, surge risk | 29.4 hr |
| EcoFlow DELTA Pro 3 | Runs, surge risk | 4.9 days |
| BLUETTI AC70 | Runs, surge risk | 22.1 hr |
| BLUETTI AC180 | Runs, surge risk | 33.1 hr |
| BLUETTI AC200L | Runs, surge risk | 2.5 days |
| Jackery Explorer 1000 v2 | Runs, surge risk | 30.7 hr |
| Jackery Explorer 1000 Plus | Runs, surge risk | 36.3 hr |
| Jackery Explorer 2000 Plus | Runs, surge risk | 2.4 days |
| Jackery Explorer 2000 v2 | Runs, surge risk | 2.4 days |
| Anker SOLIX C300 | Runs, surge risk | 8.3 hr |
| Anker SOLIX C800 | Runs, surge risk | 22.1 hr |
| Anker SOLIX C1000 | Runs, surge risk | 30.3 hr |
| Anker SOLIX F2000 (PowerHouse 767) | Runs, surge risk | 2.5 days |
| Anker SOLIX F3800 | Runs, surge risk | 4.6 days |
| Goal Zero Yeti 500X | Runs, surge risk | 14.3 hr |
| Goal Zero Yeti 1000X | Runs, surge risk | 28.6 hr |
| Goal Zero Yeti 1500X | Runs, surge risk | 43.5 hr |
Questions
What number does Willrun compare to the inverter?
Running watts of 150 W must fit under continuous output, or under a resistive boost when this load is a simple heater. Startup watts were not published.
How is runtime calculated?
Usable watt-hours (capacity × 0.85) divided by 29.6 W. The duty cycle is 0.197, derived from the source note, not assumed.
Where did this come from?
Danby lists 115 V, 150 W, and 259 kWh/year. Average draw is 29.6 W. Duty cycle 0.197 is the annual average implied by those two figures. Startup watts are not published.