BLUETTI
BLUETTI AC200L
BLUETTI AC200L stores 2,048 Wh and can hold a continuous 2,400 W load, with a published motor surge of 7,200 W, plus Power Lifting to 3,600 W for simple heaters.
Check priceOpens the manufacturer page. No affiliate link is set in links.json.
Specifications
| Capacity | 2,048 Wh |
|---|---|
| Usable in Willrun math | 1,741 Wh (× 0.85) |
| Continuous AC output | 2,400 W |
| Motor surge used | 7,200 W |
| Resistive boost | Power Lifting 3,600 W |
| Chemistry | LiFePO4 |
| Cycle life | 3,000 cycles to 80% |
| Weight | 62.4 lb |
| Dimensions | 16.5 × 11 × 14.4 |
| Outlets | 4× 120 V/20 A plus 1× NEMA TT-30, 2,400 W shared. 2 USB-C at 100 W, 2 USB-A at 18 W, a 12 V car outlet, and a 48 V RV outlet. |
| Launch price | Not verified. Current shelf prices were not copied in. |
| Source | https://www.bluettipower.com/pages/ac200l Spec block: 2,048 Wh (51.2 V, 40 Ah), 2,400 W total, Power Lifting 3,600 W, surge 7,200 W, 62.4 lb, LiFePO4, 3,000+ cycles to 80%. |
Answer pages
Every appliance in the set
Questions
How long will the BLUETTI AC200L run a CPAP?
Runs. At the AirSense 11 user-guide typical of 56.1 W, usable energy is 1,741 Wh and runtime is about 31.0 hr.
What does the 0.85 factor do?
Willrun multiplies nameplate watt-hours by 0.85 before dividing by average draw. That allowance is for inverter loss. It is not a measured efficiency for this model.
Is the surge rating safe to use for a fridge or a pump?
This model publishes a surge of 7,200 W separately from any heater-only boost, so Willrun uses it when the appliance also publishes startup watts. If the appliance does not, the verdict stays a surge risk.
Where do the station numbers come from?
Spec block: 2,048 Wh (51.2 V, 40 Ah), 2,400 W total, Power Lifting 3,600 W, surge 7,200 W, 62.4 lb, LiFePO4, 3,000+ cycles to 80%.