Answer
Can the BLUETTI AC200L run Zoeller Model 53 3/10 HP sump pump, 115 V?
Runs, surge risk
Runs, surge risk. Running draw 1,116 W is within 2,400 W continuous, but startup watts were not published. Willrun will not clear a compressor, pump, or tool start without that number. Estimated runtime: about 1.6 hr.
Check priceOpens the manufacturer page. No affiliate link is set in links.json.
The comparison
| BLUETTI AC200L | Zoeller Model 53 3/10 HP sump pump, 115 V | |
|---|---|---|
| Continuous output / running draw | 2,400 W | 1,116 W |
| Surge or peak | 7,200 W | Not published |
| Resistive boost | Power Lifting 3,600 W | Not eligible |
| Capacity / average draw | 2,048 Wh nameplate, 1,741 Wh usable | 1,116 W |
| Runtime | 1.6 hr | |
| Sources | Station source | Appliance source |
Questions
Can the BLUETTI AC200L run Zoeller Model 53 3/10 HP sump pump, 115 V?
Runs, surge risk. Running draw 1,116 W is within 2,400 W continuous, but startup watts were not published. Willrun will not clear a compressor, pump, or tool start without that number. Estimated runtime: about 1.6 hr.
What watts were compared?
Station continuous output is 2,400 W. Motor surge used is 7,200 W. Appliance running draw is 1,116 W.
How was the runtime calculated?
2,048 Wh × 0.85 = 1,741 Wh usable, divided by 1,116 W average draw.
Where did the numbers come from?
Spec block: 2,048 Wh (51.2 V, 40 Ah), 2,400 W total, Power Lifting 3,600 W, surge 7,200 W, 62.4 lb, LiFePO4, 3,000+ cycles to 80%. Zoeller lists the Model 53 at 3/10 HP, 115 V or 230 V, and 4.8–9.7 A. The 115 V automatic model in Zoeller's 50-series technical table is 9.7 A. Running watts used here are 9.7 × 115 = 1,115.5 W. Startup amps are not published. How often the float runs is site-specific, so no duty cycle is stored.