Pumps
Zoeller Model 53 3/10 HP sump pump, 115 V
Zoeller Model 53 3/10 HP sump pump, 115 V draws 1,116 W while on.
Published draw
| Running watts | 1115.5 |
|---|---|
| Startup or peak watts | Not published |
| Average watts used for runtime | Same as running, or unavailable |
| Duty cycle | None stored |
| Load type | pump |
| Source | https://zoellerpumps.com/product/model-m53-sump-pump/ Zoeller lists the Model 53 at 3/10 HP, 115 V or 230 V, and 4.8–9.7 A. The 115 V automatic model in Zoeller's 50-series technical table is 9.7 A. Running watts used here are 9.7 × 115 = 1,115.5 W. Startup amps are not published. How often the float runs is site-specific, so no duty cycle is stored. |
Stations
| Station | Verdict | Runtime |
|---|---|---|
| EcoFlow RIVER 2 | Won't run | — |
| EcoFlow RIVER 2 Max | Won't run | — |
| EcoFlow RIVER 2 Pro | Won't run | — |
| EcoFlow RIVER 3 Plus | Won't run | — |
| EcoFlow DELTA 2 | Runs, surge risk | 47 min |
| EcoFlow DELTA 2 Max | Runs, surge risk | 1.6 hr |
| EcoFlow DELTA 3 | Runs, surge risk | 47 min |
| EcoFlow DELTA 3 Plus | Runs, surge risk | 47 min |
| EcoFlow DELTA Pro 3 | Runs, surge risk | 3.1 hr |
| BLUETTI AC70 | Won't run | — |
| BLUETTI AC180 | Runs, surge risk | 53 min |
| BLUETTI AC200L | Runs, surge risk | 1.6 hr |
| Jackery Explorer 1000 v2 | Runs, surge risk | 49 min |
| Jackery Explorer 1000 Plus | Runs, surge risk | 58 min |
| Jackery Explorer 2000 Plus | Runs, surge risk | 1.6 hr |
| Jackery Explorer 2000 v2 | Runs, surge risk | 1.6 hr |
| Anker SOLIX C300 | Won't run | — |
| Anker SOLIX C800 | Runs, surge risk | 35 min |
| Anker SOLIX C1000 | Runs, surge risk | 48 min |
| Anker SOLIX F2000 (PowerHouse 767) | Runs, surge risk | 1.6 hr |
| Anker SOLIX F3800 | Runs, surge risk | 2.9 hr |
| Goal Zero Yeti 500X | Won't run | — |
| Goal Zero Yeti 1000X | Runs, surge risk | 46 min |
| Goal Zero Yeti 1500X | Runs, surge risk | 1.2 hr |
Questions
What number does Willrun compare to the inverter?
Running watts of 1,116 W must fit under continuous output, or under a resistive boost when this load is a simple heater. Startup watts were not published.
How is runtime calculated?
Runtime needs an average draw. This record does not have one that should be used as a continuous load.
Where did this come from?
Zoeller lists the Model 53 at 3/10 HP, 115 V or 230 V, and 4.8–9.7 A. The 115 V automatic model in Zoeller's 50-series technical table is 9.7 A. Running watts used here are 9.7 × 115 = 1,115.5 W. Startup amps are not published. How often the float runs is site-specific, so no duty cycle is stored.