Answer
Can the Goal Zero Yeti 1000X run Zoeller Model 53 3/10 HP sump pump, 115 V?
Runs, surge risk
Runs, surge risk. Running draw 1,116 W is within 1,500 W continuous, but startup watts were not published. Willrun will not clear a compressor, pump, or tool start without that number. Estimated runtime: about 46 min.
Check priceOpens the manufacturer page. No affiliate link is set in links.json.
The comparison
| Goal Zero Yeti 1000X | Zoeller Model 53 3/10 HP sump pump, 115 V | |
|---|---|---|
| Continuous output / running draw | 1,500 W | 1,116 W |
| Surge or peak | Not applied to motors | Not published |
| Resistive boost | — | Not eligible |
| Capacity / average draw | 997 Wh nameplate, 847 Wh usable | 1,116 W |
| Runtime | 46 min | |
| Sources | Station source | Appliance source |
Questions
Can the Goal Zero Yeti 1000X run Zoeller Model 53 3/10 HP sump pump, 115 V?
Runs, surge risk. Running draw 1,116 W is within 1,500 W continuous, but startup watts were not published. Willrun will not clear a compressor, pump, or tool start without that number. Estimated runtime: about 46 min.
What watts were compared?
Station continuous output is 1,500 W. No motor-surge rating is applied. Appliance running draw is 1,116 W.
How was the runtime calculated?
997 Wh × 0.85 = 847 Wh usable, divided by 1,116 W average draw.
Where did the numbers come from?
Battery block: 997 Wh, NMC, 500 cycles to 80% at 1C, 31.68 lb. The ports section says 1,500 W and 3,500 W surge; a diagram label on the same page says 1,500 W and 3,000 W surge. The surge is omitted because the page disagrees with itself. Continuous 1,500 W is consistent. Zoeller lists the Model 53 at 3/10 HP, 115 V or 230 V, and 4.8–9.7 A. The 115 V automatic model in Zoeller's 50-series technical table is 9.7 A. Running watts used here are 9.7 × 115 = 1,115.5 W. Startup amps are not published. How often the float runs is site-specific, so no duty cycle is stored.