Cooling
Amana AMND501BW dehumidifier, about 50 pints/day
Amana AMND501BW dehumidifier, about 50 pints/day draws 485 W while on.
Published draw
| Running watts | 485 |
|---|---|
| Startup or peak watts | Not published |
| Average watts used for runtime | 485 |
| Duty cycle | None stored |
| Load type | compressor |
| Source | https://data.energystar.gov/d/mgiu-hu4z ENERGY STAR lists 49.43 pints/day, integrated energy factor 2.01 L/kWh, and 520 kWh/year. Operating draw at the rated test condition is (49.43 × 0.473176 L/pint ÷ 24 h) ÷ 2.01 L/kWh × 1,000 = 485 W. That is the draw while it is removing water at the rated rate, not a whole-year average. Startup watts are not published. |
Stations
| Station | Verdict | Runtime |
|---|---|---|
| EcoFlow RIVER 2 | Won't run | — |
| EcoFlow RIVER 2 Max | Runs, surge risk | 54 min |
| EcoFlow RIVER 2 Pro | Runs, surge risk | 1.3 hr |
| EcoFlow RIVER 3 Plus | Runs, surge risk | 30 min |
| EcoFlow DELTA 2 | Runs, surge risk | 1.8 hr |
| EcoFlow DELTA 2 Max | Runs, surge risk | 3.6 hr |
| EcoFlow DELTA 3 | Runs, surge risk | 1.8 hr |
| EcoFlow DELTA 3 Plus | Runs, surge risk | 1.8 hr |
| EcoFlow DELTA Pro 3 | Runs, surge risk | 7.2 hr |
| BLUETTI AC70 | Runs, surge risk | 1.3 hr |
| BLUETTI AC180 | Runs, surge risk | 2.0 hr |
| BLUETTI AC200L | Runs, surge risk | 3.6 hr |
| Jackery Explorer 1000 v2 | Runs, surge risk | 1.9 hr |
| Jackery Explorer 1000 Plus | Runs, surge risk | 2.2 hr |
| Jackery Explorer 2000 Plus | Runs, surge risk | 3.6 hr |
| Jackery Explorer 2000 v2 | Runs, surge risk | 3.6 hr |
| Anker SOLIX C300 | Won't run | — |
| Anker SOLIX C800 | Runs, surge risk | 1.3 hr |
| Anker SOLIX C1000 | Runs, surge risk | 1.9 hr |
| Anker SOLIX F2000 (PowerHouse 767) | Runs, surge risk | 3.6 hr |
| Anker SOLIX F3800 | Runs, surge risk | 6.7 hr |
| Goal Zero Yeti 500X | Won't run | — |
| Goal Zero Yeti 1000X | Runs, surge risk | 1.7 hr |
| Goal Zero Yeti 1500X | Runs, surge risk | 2.7 hr |
Questions
What number does Willrun compare to the inverter?
Running watts of 485 W must fit under continuous output, or under a resistive boost when this load is a simple heater. Startup watts were not published.
How is runtime calculated?
Usable watt-hours (capacity × 0.85) divided by 485 W. No duty cycle is applied beyond the stored average.
Where did this come from?
ENERGY STAR lists 49.43 pints/day, integrated energy factor 2.01 L/kWh, and 520 kWh/year. Operating draw at the rated test condition is (49.43 × 0.473176 L/pint ÷ 24 h) ÷ 2.01 L/kWh × 1,000 = 485 W. That is the draw while it is removing water at the rated rate, not a whole-year average. Startup watts are not published.