Answer
Can the EcoFlow RIVER 2 run Lasko 755320 ceramic heater, high?
Won't run
Won't run. 1,500 W is above the 300 W continuous output, and it is outside the 600 W X-Boost that Willrun will apply to simple heaters. Estimated runtime: no runtime, because it will not stay on.
Check priceOpens the manufacturer page. No affiliate link is set in links.json.
The comparison
| EcoFlow RIVER 2 | Lasko 755320 ceramic heater, high | |
|---|---|---|
| Continuous output / running draw | 300 W | 1,500 W |
| Surge or peak | Not applied to motors | 1,500 W |
| Resistive boost | X-Boost 600 W | Eligible |
| Capacity / average draw | 256 Wh nameplate, 218 Wh usable | 1,500 W |
| Runtime | — | |
| Sources | Station source | Appliance source |
Questions
Can the EcoFlow RIVER 2 run Lasko 755320 ceramic heater, high?
Won't run. 1,500 W is above the 300 W continuous output, and it is outside the 600 W X-Boost that Willrun will apply to simple heaters. Estimated runtime: no runtime, because it will not stay on.
What watts were compared?
Station continuous output is 300 W. No motor-surge rating is applied. Appliance running draw is 1,500 W. Published appliance peak is 1,500 W.
How was the runtime calculated?
256 Wh × 0.85 = 218 Wh usable, divided by 1,500 W average draw.
Where did the numbers come from?
US/CA comparison table: 256 Wh, 2 AC outlets at 300 W, X-Boost 600 W, 7.7 lb, LiFePO4, 3,000 cycles to 80%+. EcoFlow describes the 600 W figure as surge with X-Boost. Willrun treats it as a resistive boost, not motor-start capacity. The manual language for X-Boost says it suits heating devices. Lasko lists 120 V, current 7.5 A to 12.5 A, and energy output 900 W to 1,500 W. High is 1,500 W. A resistive element does not have a separate motor surge, so surge is set equal to the high setting. The thermostat cycles in real rooms; this entry assumes the high element is on.