Answer
Can the EcoFlow DELTA 2 run Lasko 755320 ceramic heater, high?
Runs
Runs. The 1,500 W element is within the 1,800 W continuous output. A resistive load does not add a separate motor surge. Estimated runtime: about 35 min.
Check priceOpens the manufacturer page. No affiliate link is set in links.json.
The comparison
| EcoFlow DELTA 2 | Lasko 755320 ceramic heater, high | |
|---|---|---|
| Continuous output / running draw | 1,800 W | 1,500 W |
| Surge or peak | Not applied to motors | 1,500 W |
| Resistive boost | X-Boost 2,200 W | Eligible |
| Capacity / average draw | 1,024 Wh nameplate, 870 Wh usable | 1,500 W |
| Runtime | 35 min | |
| Sources | Station source | Appliance source |
Questions
Can the EcoFlow DELTA 2 run Lasko 755320 ceramic heater, high?
Runs. The 1,500 W element is within the 1,800 W continuous output. A resistive load does not add a separate motor surge. Estimated runtime: about 35 min.
What watts were compared?
Station continuous output is 1,800 W. No motor-surge rating is applied. Appliance running draw is 1,500 W. Published appliance peak is 1,500 W.
How was the runtime calculated?
1,024 Wh × 0.85 = 870 Wh usable, divided by 1,500 W average draw.
Where did the numbers come from?
US product page: about 1 kWh, 1,800 W output, X-Boost up to 2,200 W, LiFePO4, 3,000+ cycles. Weight, size, and the 4 AC outlets are from the EcoFlow DELTA 2 user manual. The manual line that pairs 1,800 W with a 2,700 W surge is printed next to 230 V, so that surge is not used for this 120 V entry. Lasko lists 120 V, current 7.5 A to 12.5 A, and energy output 900 W to 1,500 W. High is 1,500 W. A resistive element does not have a separate motor surge, so surge is set equal to the high setting. The thermostat cycles in real rooms; this entry assumes the high element is on.