Answer

Can the Westinghouse iGen4500DFc run Zoeller Model 53 3/10 HP sump pump, 115 V?

Runs

Runs. Running draw 1,116 W fits within 3,700 running watts. Startup watts were not published; 4,500 starting watts is at least 3× the running draw, the common planning allowance for a compressor or pump start.

Check priceOpens the manufacturer page. No affiliate link is set in links.json.

The comparison

Westinghouse iGen4500DFcZoeller Model 53 3/10 HP sump pump, 115 V
Running watts3,700 W1,116 W
Starting / surge watts4,500 WNot published
Typeinverter, Dual fuel (gasoline/propane)Pumps
Published runtime18 hr at 25% load on gasoline, 22 hr at 25% on propane
SourcesGenerator sourceAppliance source

Questions

Can the Westinghouse iGen4500DFc run Zoeller Model 53 3/10 HP sump pump, 115 V?

Runs. Running draw 1,116 W fits within 3,700 running watts. Startup watts were not published; 4,500 starting watts is at least 3× the running draw, the common planning allowance for a compressor or pump start.

What watts were compared?

Generator: 3,700 running W and 4,500 starting W on gasoline. Appliance: 1,116 W running, startup not published.

How long will it run?

Fuel runtime depends on total load. Published runtime: 18 hr at 25% load on gasoline, 22 hr at 25% on propane.

Where did the numbers come from?

Westinghouse spec sheet and manual: gas 4500 peak / 3700 running; propane 4050 / 3330; 5-20R duplex, TT-30R, 2 USB; 3.4 gal; 18 hr gas / 22 hr propane at 25%; 52 dBA; 105.8 lb dry; CO sensor. Zoeller lists the Model 53 at 3/10 HP, 115 V or 230 V, and 4.8–9.7 A. The 115 V automatic model in Zoeller's 50-series technical table is 9.7 A. Running watts used here are 9.7 × 115 = 1,115.5 W. Startup amps are not published. How often the float runs is site-specific, so no duty cycle is stored.

Safety first

More on the Westinghouse iGen4500DFc · More on this appliance