Answer

Can the WEN DF1100T run Lasko 755320 ceramic heater, high?

Runs

Runs. Running draw 1,500 W fits within 8,300 running watts, and published startup 1,500 W fits within 11,000 starting watts.

Check priceOpens the manufacturer page. No affiliate link is set in links.json.

The comparison

WEN DF1100TLasko 755320 ceramic heater, high
Running watts8,300 W1,500 W
Starting / surge watts11,000 W1,500 W
Typeopen-frame, Dual fuel (gasoline/propane)Heat
Published runtime8.5 hr at 50% load on gasoline, 3 hr on a 20-lb propane tank
SourcesGenerator sourceAppliance source

Questions

Can the WEN DF1100T run Lasko 755320 ceramic heater, high?

Runs. Running draw 1,500 W fits within 8,300 running watts, and published startup 1,500 W fits within 11,000 starting watts.

What watts were compared?

Generator: 8,300 running W and 11,000 starting W on gasoline. Appliance: 1,500 W running, 1,500 W startup.

How long will it run?

Fuel runtime depends on total load. Published runtime: 8.5 hr at 50% load on gasoline, 3 hr on a 20-lb propane tank.

Where did the numbers come from?

WEN product page and manual: gasoline 11000 surge / 8300 running; propane 9500 / 7500; 4 GFCI 5-20R, L5-30R, 14-50R, 12V DC; 6.6 gal; 8.5 hr gas at 50%, 3 hr propane (20 lb). No L14-30R: a 30A 240V inlet needs a 14-50P to L14-30R adapter cord, which Willrun does not assume. Lasko lists 120 V, current 7.5 A to 12.5 A, and energy output 900 W to 1,500 W. High is 1,500 W. A resistive element does not have a separate motor surge, so surge is set equal to the high setting. The thermostat cycles in real rooms; this entry assumes the high element is on.

Safety first

More on the WEN DF1100T · More on this appliance