Answer

Can the Westinghouse WGen9500DF run Lasko 755320 ceramic heater, high?

Runs

Runs. Running draw 1,500 W fits within 9,500 running watts, and published startup 1,500 W fits within 12,500 starting watts.

Check priceOpens the manufacturer page. No affiliate link is set in links.json.

The comparison

Westinghouse WGen9500DFLasko 755320 ceramic heater, high
Running watts9,500 W1,500 W
Starting / surge watts12,500 W1,500 W
Typeopen-frame, Dual fuel (gasoline/propane)Heat
Published runtime12 hr at 25% load on gasoline, 7 hr at 50% on propane
SourcesGenerator sourceAppliance source

Questions

Can the Westinghouse WGen9500DF run Lasko 755320 ceramic heater, high?

Runs. Running draw 1,500 W fits within 9,500 running watts, and published startup 1,500 W fits within 12,500 starting watts.

What watts were compared?

Generator: 9,500 running W and 12,500 starting W on gasoline. Appliance: 1,500 W running, 1,500 W startup.

How long will it run?

Fuel runtime depends on total load. Published runtime: 12 hr at 25% load on gasoline, 7 hr at 50% on propane.

Where did the numbers come from?

Westinghouse spec table: gas 12500 peak / 9500 running; propane 11200 / 8500; L14-30R and 14-50R; 6.6 gal; 12 hr at 25% gas, 7 hr at 50% propane; 74 dBA; 211 lb; THD under 23%. Lasko lists 120 V, current 7.5 A to 12.5 A, and energy output 900 W to 1,500 W. High is 1,500 W. A resistive element does not have a separate motor surge, so surge is set equal to the high setting. The thermostat cycles in real rooms; this entry assumes the high element is on.

Safety first

More on the Westinghouse WGen9500DF · More on this appliance