Answer

Can the Westinghouse iGen4500DFc run ResMed AirSense 11, typical power from the user guide?

Runs

Runs. Running draw 56 W fits within 3,700 running watts, and published startup 73 W fits within 4,500 starting watts.

Check priceOpens the manufacturer page. No affiliate link is set in links.json.

The comparison

Westinghouse iGen4500DFcResMed AirSense 11, typical power from the user guide
Running watts3,700 W56 W
Starting / surge watts4,500 W73 W
Typeinverter, Dual fuel (gasoline/propane)Medical
Published runtime18 hr at 25% load on gasoline, 22 hr at 25% on propane
SourcesGenerator sourceAppliance source

Questions

Can the Westinghouse iGen4500DFc run ResMed AirSense 11, typical power from the user guide?

Runs. Running draw 56 W fits within 3,700 running watts, and published startup 73 W fits within 4,500 starting watts.

What watts were compared?

Generator: 3,700 running W and 4,500 starting W on gasoline. Appliance: 56 W running, 73 W startup.

How long will it run?

Fuel runtime depends on total load. Published runtime: 18 hr at 25% load on gasoline, 22 hr at 25% on propane.

Where did the numbers come from?

Westinghouse spec sheet and manual: gas 4500 peak / 3700 running; propane 4050 / 3330; 5-20R duplex, TT-30R, 2 USB; 3.4 gal; 18 hr gas / 22 hr propane at 25%; 52 dBA; 105.8 lb dry; CO sensor. Americas user guide, 65 W power supply section: typical power consumption 56.1 W (111.5 VA) and peak power consumption 73.2 W (137.6 VA). This is the published system figure, not the lower no-humidifier row on ResMed's separate therapy-power sheet.

Safety first

More on the Westinghouse iGen4500DFc · More on this appliance