Answer

Can the WEN DF1100T run ResMed AirSense 11, typical power from the user guide?

Runs, surge risk

Runs. Running draw 56 W fits within 8,300 running watts, and published startup 73 W fits within 11,000 starting watts. This is an open-frame generator; for sensitive electronics or medical devices an inverter generator (under 3% THD) is the safer choice.

Check priceOpens the manufacturer page. No affiliate link is set in links.json.

The comparison

WEN DF1100TResMed AirSense 11, typical power from the user guide
Running watts8,300 W56 W
Starting / surge watts11,000 W73 W
Typeopen-frame, Dual fuel (gasoline/propane)Medical
Published runtime8.5 hr at 50% load on gasoline, 3 hr on a 20-lb propane tank
SourcesGenerator sourceAppliance source

Questions

Can the WEN DF1100T run ResMed AirSense 11, typical power from the user guide?

Runs. Running draw 56 W fits within 8,300 running watts, and published startup 73 W fits within 11,000 starting watts. This is an open-frame generator; for sensitive electronics or medical devices an inverter generator (under 3% THD) is the safer choice.

What watts were compared?

Generator: 8,300 running W and 11,000 starting W on gasoline. Appliance: 56 W running, 73 W startup.

How long will it run?

Fuel runtime depends on total load. Published runtime: 8.5 hr at 50% load on gasoline, 3 hr on a 20-lb propane tank.

Where did the numbers come from?

WEN product page and manual: gasoline 11000 surge / 8300 running; propane 9500 / 7500; 4 GFCI 5-20R, L5-30R, 14-50R, 12V DC; 6.6 gal; 8.5 hr gas at 50%, 3 hr propane (20 lb). No L14-30R: a 30A 240V inlet needs a 14-50P to L14-30R adapter cord, which Willrun does not assume. Americas user guide, 65 W power supply section: typical power consumption 56.1 W (111.5 VA) and peak power consumption 73.2 W (137.6 VA). This is the published system figure, not the lower no-humidifier row on ResMed's separate therapy-power sheet.

Safety first

More on the WEN DF1100T · More on this appliance