Answer
Can the EcoFlow RIVER 2 run Danby DCR032C1WDB 3.2 cu ft compact refrigerator?
Runs, surge risk
Runs, surge risk. Running draw 66.4 W is within 300 W continuous, but startup watts were not published. Willrun will not clear a compressor, pump, or tool start without that number. Estimated runtime: about 8.7 hr.
Check priceOpens the manufacturer page. No affiliate link is set in links.json.
The comparison
| EcoFlow RIVER 2 | Danby DCR032C1WDB 3.2 cu ft compact refrigerator | |
|---|---|---|
| Continuous output / running draw | 300 W | 66.4 W |
| Surge or peak | Not applied to motors | Not published |
| Resistive boost | X-Boost 600 W | Not eligible |
| Capacity / average draw | 256 Wh nameplate, 218 Wh usable | 24.9 W |
| Runtime | 8.7 hr | |
| Sources | Station source | Appliance source |
Questions
Can the EcoFlow RIVER 2 run Danby DCR032C1WDB 3.2 cu ft compact refrigerator?
Runs, surge risk. Running draw 66.4 W is within 300 W continuous, but startup watts were not published. Willrun will not clear a compressor, pump, or tool start without that number. Estimated runtime: about 8.7 hr.
What watts were compared?
Station continuous output is 300 W. No motor-surge rating is applied. Appliance running draw is 66.4 W.
How was the runtime calculated?
256 Wh × 0.85 = 218 Wh usable, divided by 24.9 W average draw.
Where did the numbers come from?
US/CA comparison table: 256 Wh, 2 AC outlets at 300 W, X-Boost 600 W, 7.7 lb, LiFePO4, 3,000 cycles to 80%+. EcoFlow describes the 600 W figure as surge with X-Boost. Willrun treats it as a resistive boost, not motor-start capacity. The manual language for X-Boost says it suits heating devices. Danby lists 115 V, 66.4 W, and 218 kWh/year. Average draw is 218 × 1,000 ÷ 8,760 = 24.9 W. Duty cycle 0.375 is that average divided by 66.4 W, so it is an annual-average compressor fraction, not a hot-day measurement. Startup watts are not published.