Answer

Can the Pulsar G12KBN run ResMed AirSense 11, typical power from the user guide?

Runs, surge risk

Runs. Running draw 56 W fits within 9,500 running watts, and published startup 73 W fits within 12,000 starting watts. This is an open-frame generator; for sensitive electronics or medical devices an inverter generator (under 3% THD) is the safer choice.

Check priceOpens the manufacturer page. No affiliate link is set in links.json.

The comparison

Pulsar G12KBNResMed AirSense 11, typical power from the user guide
Running watts9,500 W56 W
Starting / surge watts12,000 W73 W
Typeopen-frame, Dual fuel (gasoline/propane)Medical
Published runtime13 hr at 50% load on gasoline
SourcesGenerator sourceAppliance source

Questions

Can the Pulsar G12KBN run ResMed AirSense 11, typical power from the user guide?

Runs. Running draw 56 W fits within 9,500 running watts, and published startup 73 W fits within 12,000 starting watts. This is an open-frame generator; for sensitive electronics or medical devices an inverter generator (under 3% THD) is the safer choice.

What watts were compared?

Generator: 9,500 running W and 12,000 starting W on gasoline. Appliance: 56 W running, 73 W startup.

How long will it run?

Fuel runtime depends on total load. Published runtime: 13 hr at 50% load on gasoline.

Where did the numbers come from?

Pulsar product page and manual: gasoline 12000 peak / 9500 rated; propane 10800 / 8550; 4 x 120V 20A, 120/240V 30A twist-lock, 50A, 12V DC; 8 gal; 13 hr at 50%. Americas user guide, 65 W power supply section: typical power consumption 56.1 W (111.5 VA) and peak power consumption 73.2 W (137.6 VA). This is the published system figure, not the lower no-humidifier row on ResMed's separate therapy-power sheet.

Safety first

More on the Pulsar G12KBN · More on this appliance