Answer
Can the Honda EU3000iS run ResMed AirSense 11, typical power from the user guide?
Runs
Runs. Running draw 56 W fits within 2,800 running watts, and published startup 73 W fits within 3,000 starting watts.
Check priceOpens the manufacturer page. No affiliate link is set in links.json.
The comparison
| Honda EU3000iS | ResMed AirSense 11, typical power from the user guide | |
|---|---|---|
| Running watts | 2,800 W | 56 W |
| Starting / surge watts | 3,000 W | 73 W |
| Type | inverter, Gasoline | Medical |
| Published runtime | 6.9 hr at rated load, 19.6 hr at 1/4 load | |
| Sources | Generator source | Appliance source |
Questions
Can the Honda EU3000iS run ResMed AirSense 11, typical power from the user guide?
Runs. Running draw 56 W fits within 2,800 running watts, and published startup 73 W fits within 3,000 starting watts.
What watts were compared?
Generator: 2,800 running W and 3,000 starting W on gasoline. Appliance: 56 W running, 73 W startup.
How long will it run?
Fuel runtime depends on total load. Published runtime: 6.9 hr at rated load, 19.6 hr at 1/4 load.
Where did the numbers come from?
Honda spec table: 120V 3000W max (25A), 2800W rated (23.3A); 20A duplex and 30A 125V locking receptacle; 3.4 gal; 6.9 hr rated / 19.6 hr 1/4 load; 57/50 dB(A); 130.7 lb dry. The 30A outlet is an L5-30R, not a TT-30R. Americas user guide, 65 W power supply section: typical power consumption 56.1 W (111.5 VA) and peak power consumption 73.2 W (137.6 VA). This is the published system figure, not the lower no-humidifier row on ResMed's separate therapy-power sheet.
Safety first
- Run a generator outdoors only, at least 20 feet from the house, with the exhaust pointed away from doors, windows and vents. Never in a garage, basement, shed or crawlspace, even with the door open.
- Carbon monoxide is odorless and can kill in minutes. Keep battery CO alarms working inside the home.
- Never backfeed a house by plugging a generator into a wall outlet or dryer receptacle. It can energize utility lines and kill a lineworker or a neighbor.
- Connecting to home wiring requires a transfer switch or a listed breaker interlock with a power inlet box, installed by a licensed electrician and permitted where your jurisdiction requires it.