Community data

Submit a real-world power test

Measured your CPAP, fridge or space heater on a power station? Send the number and the proof. Willrun's runtimes come from nameplate watt-hours, an 85% usable allowance and about 15 W of inverter idle draw. Owner measurements are how we find out where that model is optimistic or conservative.

What counts as proof

A photo of a plug-in meter (Kill A Watt, Emporia, P3) showing watts or kWh, with the appliance in frame if you can.
A screenshot of the station's app (EcoFlow, Jackery, Anker, BLUETTI) showing output watts, or the start and end battery percentage for a runtime test.
Or a link to a video, forum post or log you published that shows the same numbers.

What you measuredPower station / generator *Appliance or CPAP (make + model) *What the number is *Measured value *Output usedSettingsStart % (if runtime)End % (if runtime)How you measuredConditions and notes

Proof (photo or link required)Photo or screenshotJPEG, PNG, WebP or HEIC, up to 8 MB.Or a proof linkVideo, forum post, PVOutput page, gist…

Credit and contact (optional)Name or handle for creditShown with your result if we publish it. Leave blank to stay anonymous.EmailOnly used if we have a question about your test. Never published, shared or added to a list.

What happens next

Your entry lands in a private review queue. Nothing is published automatically.
We check the photo or link against your numbers, the product's published specs and our own estimate. Results that don't add up get an email question (if you left one) or are set aside.
Verified results appear on the matching page as a Verified owner test, credited to the name or handle you gave, or "a reader" if you left it blank. Photos are only published after review, with personal details cropped or blurred.

Tips for a clean measurement

Note whether you ran from the AC outlet or the 12 V port. AC adds the inverter's own draw (roughly 10–20 W on most units), which matters a lot for small loads like a CPAP.
For runtime, start at 100%, record when the station shuts off or hits a set percentage, and note anything else plugged in.
Compressor appliances cycle. Log at least an hour, or use a meter's kWh total rather than one instantaneous reading.

Details on what this form collects and how it is stored are in the privacy policy. To remove a submission, email eyevueventures@gmail.com.