Medical
ResMed AirCurve 10 VAuto BiPAP with HumidAir and heated tube
ResMed AirCurve 10 VAuto BiPAP with HumidAir and heated tube draws 41 W while on, and about 41 W after its published duty cycle.
Medical safety notice: Will It Run? gives general power estimates only, not medical advice. Power draw varies by model, settings, pressure, humidifier and altitude. Before relying on any battery, power station, inverter or generator for a medical device, confirm approved power sources with the device manufacturer and your doctor or equipment supplier, and test your setup before an emergency. Never change prescribed settings to extend battery life. If your therapy is life-sustaining, keep the backup your supplier provides, register with your utility's medical-needs program, and have an evacuation plan. Run generators outdoors only, at least 20 ft from windows and doors, because of carbon monoxide risk. In an emergency, call 911.
An 8-hour night uses about 328 Wh. Compare every CPAP and BiPAP setting on the CPAP hub.
Published draw
| Running watts | 41 |
|---|---|
| Startup or peak watts | Not published |
| Average watts used for runtime | 41 |
| Duty cycle | 1 |
| Load type | electronics |
| Source | https://www.resmed-healthcare.de/wp-content/uploads/2025/10/1018528r11_Uebers_Stromverbrauch-Geraete_RDE_PDF-1.pdf ResMed's therapy-device power table (ResMed Deutschland, Art.-Nr. 1018528/11) lists AirCurve 10 VAuto with HumidAir and heated ClimateLineAir tube at 41 Wh during operation. Energy per hour equals average watts, so the average draw is 41 W. ResMed notes the values were measured in a lab and that a local meter can differ. |
Stations
| Station | Verdict | Runtime on AC | On DC, best case |
|---|---|---|---|
| EcoFlow RIVER 2 | Runs | 3.9 hr | — |
| EcoFlow RIVER 2 Max | Runs | 7.8 hr | — |
| EcoFlow RIVER 2 Pro | Runs | 11.7 hr | — |
| EcoFlow RIVER 3 Plus | Runs | 4.3 hr | — |
| EcoFlow DELTA 2 | Runs | 15.5 hr | — |
| EcoFlow DELTA 2 Max | Runs | 31.1 hr | — |
| EcoFlow DELTA 3 | Runs | 15.5 hr | — |
| EcoFlow DELTA 3 Plus | Runs | 15.5 hr | — |
| EcoFlow DELTA Pro 3 | Runs | 2.6 days | — |
| BLUETTI AC70 | Runs | 11.7 hr | — |
| BLUETTI AC180 | Runs | 17.5 hr | — |
| BLUETTI AC200L | Runs | 31.1 hr | — |
| Jackery Explorer 1000 v2 | Runs | 16.2 hr | — |
| Jackery Explorer 1000 Plus | Runs | 19.2 hr | — |
| Jackery Explorer 2000 Plus | Runs | 31.0 hr | — |
| Jackery Explorer 2000 v2 | Runs | 31.0 hr | — |
| Anker SOLIX C300 | Runs | 4.4 hr | — |
| Anker SOLIX C800 | Runs | 11.7 hr | — |
| Anker SOLIX C1000 | Runs | 16.0 hr | — |
| Anker SOLIX F2000 (PowerHouse 767) | Runs | 31.1 hr | — |
| Anker SOLIX F3800 | Runs | 40.3 hr | — |
| Goal Zero Yeti 500X | Runs | 7.5 hr | — |
| Goal Zero Yeti 1000X | Runs | 15.1 hr | — |
| Goal Zero Yeti 1500X | Runs | 23.0 hr | — |
Anker SOLIX F3800 row: uses about 40 W of idle draw instead of 15 W, because Anker's FAQ for the F3800 Plus lists about 40 W with AC on and nothing connected (Anker; F3800 idle table).
How AC runtime is figured: usable Wh (nameplate × 0.85) ÷ (CPAP watts + about 15 W). The 15 W is the inverter's own draw just to stay on: BLUETTI counts about 15 W of self-consumption in its AC180 runtime formula, and an owner test measured about 17.5 W idle on a DELTA 3 Plus. Larger stations can idle higher, so test your own setup before you rely on it. DC figures skip the inverter and are a best case. Method and DC converter limits: CPAP power station guide. — means no DC figure: ResMed's AirSense 10 guide says to turn humidity off on an external battery, and the Air10 DC converter's 13 A input is above a typical 10 A car port.
Shop power stations on AmazonAs an Amazon Associate we earn from qualifying purchases.
Questions
What number does Willrun compare to the inverter?
Running watts of 41 W must fit under continuous output. Startup watts were not published.
How is runtime calculated?
On AC: usable watt-hours (capacity × 0.85) divided by (41 W + about 15 W of inverter draw). On DC with the maker's converter there is no inverter, so the best case divides by 41 W alone.
Where did this come from?
ResMed's therapy-device power table (ResMed Deutschland, Art.-Nr. 1018528/11) lists AirCurve 10 VAuto with HumidAir and heated ClimateLineAir tube at 41 Wh during operation. Energy per hour equals average watts, so the average draw is 41 W. ResMed notes the values were measured in a lab and that a local meter can differ.